Відео

Will fail a PA state inspection. Had to remove mine...

Really appreciate the video. Minor correction, but this appears to be a MP1522 transfer case, not an NV321. The NV321 was used on the KJ Liberty.

Don’t you have to do this multiple times though as if you had a friend pressing and holding the pedal? Or just do once and bleed it continuously once?

TY…..

Hey thanks for covering the camera while you show the bleeder bauble dip shit

0:45

Nice to see a fellow prodigy 😅

ua-cam.com/play/PL5RSqU3XvVj5knZwVpqyWjCUNRo0DFgqc.html&si=Bo3rYpM1oBGaFyio

Nice video very helpful, love from Connecticut 🙌🏻

Extremely helpful. Thank you.

Could you use an impact? Would be better than a vice. This is surprisingly simple.

these components look very similar to the ib5 stuff from the SE I wonder if you can run the 4.07 diff from the base fiesta 5mt in the ST 6mt?

Gonna do 100 cell for secondary cat, I already have 200 cell for the downpipe slooking to add a little more sound, better flow & hp

How did you press the bearing on the diff?

I probably shouldn't even attempt this. I can't find the bleeder valve, and I can't tell from the video exactly where it is. Can anybody help me? Got a pic or directions to help me find it? I've bled brakes many times, I'm just am having trouble locating the clutch bleeder.

Thanks for the Video but you didn't montion if it is manual or automatic transmission?

why not just cut the bottom, I mean fully open it, on the stock airbox ? Do you felt an improvement in performance with the new airbox ?

That way take so long. And it do not work with every thing.

I have a 2000 Mazda Protege and that is not the same oil pan

Beruf: Hufschmid

mine doesn't have a plastic tube like that, they are all metal lines that you can't see thru, none have a bleeder valve on them, they are all securely bolted to the clutch slave, I guess I'm missing something

Do I fill the transfer case up to the hole? 3 quarts entered. Is it too much?

How is this holding up after 4 yrs?

No shimming?

So no shimming or anything? Hows it holding up?

Hey man. Would you happen to have the part number for the ring gear bolts?

So the brake reservoir is the same than feeds the clutch master cylinder?

what are the symptoms when the transfer case is dry or damage? my 2009 Liberty start making like a misfire after warmup, only on take off or before 2.000 rpm.........whene engine is cold, runs great!

Where would I find this hose/line

it's the same trick I use for bleeding my brake lines! interesting! I'm ready to start! thanks for the advice!

Thank you. I think this is my issue.

Found this video and watched out of curiosity as a fellow Mazda owner. What symptoms would warrant flushing the clutch fluid?

Dude those euro headlights are sweet were they difficult to install?

Hey I'm in Pittsburgh and looking for someone to do an LSD install for my 2019 Fiesta ST. I noticed your screwdriver handle. Let me know what you'd charge to help me out. Thanks!

A little late but do you need a tune in order to get the most out of this? I just got mine from whoosh and was wondering.

lol I have to get my rebuilt also

Not a pro myself and maybe it's a stupid question but how does a gearbox break down? Is that a common thing with these cars or were you just unlucky?

Why bother, your video sucked.

Anyone know where I can get my hands on one of those manuals?

How does bolt f come out?

Thanks Great lesson

Is this an IB5 gearbox? I'm wanting to install a quaife ATB in my focus mk 1 box. All of the other videos online that I can find seem to remove the differential from the other side, as in removing the 5th gear etc. The method that you're showing seems to be much simpler.👍

I have stock turbo with thermal exhaust. I want a catted downpipe but some people say with stock turbo the downpipe don’t make any effects. I only want it for sound. Doesn’t matter for me if no gain. But I’m thinking in any loose. Or the turbo would affected. Opinion about downpipe? Catted of course. Don want much noise. Just some burbles or crackers

How hard is it to mix gasses to make E30? Could you make a video on this?

Hahaha

Why did you not show the complete removal of the Trans after all the bolts were out and how you lowered it out?

How many transmission bolts are there?

My slave cylinder doesnt nipple have a a screw how do I release pressure

do you do this with car on or off?

My son came up with a great way to release the lower ball joint. Chain the control arm to the front axle of a floor jack and use a block of wood to jack against the hub. This puts some real pressure on the ball joint to pop it out of the spindle. Then you can tap on it to release.